ENGINEERING GRAPHICS ASSIGN - 1
2 Lines inclined to single plane
2.1 A
line AB, has end A 20mm below and 300 inclined to HP. If the line is 30mm behind and
parallel to VP, draw projections and find its true length. The distance between
the end projectors is 60 mm and the line is in the 3rd quadrant
2.2 A
line PQ of length 60 mm is parallel to VP and 30 mm in front of it. If
the point P is 16 mm above and point Q is 50 mm above HP. Draw its projections
and find the horizontal trace.
2.3 The
end C of a line CD is 20 mm in front of VP while the end D is 32 mm above HP.
The line is parallel to HP and 450 inclined to VP. Draw its
projections and mark its VT, if the length of line is 50 mm.
2.4 The
front view of a line RS is 80mm long and it makes an angle of 450 to
xy line the midpoint m’ of the line r’s’ is 8 mm below the xy line
and the end R is in the 2nd quadrant. if the line is 16 mm behind
and parallel to VP, draw its projections and mark the traces
2.5 Question
no 3, exercise-XI page 11.59 from engg graphics for degree by PI Varghese
2.6 Question
no 3, exercise-XI page 11.59 from engg graphics for degree by PI Varghese
(Question
2.5 and 2.6 are for home work)
download pdf here
Subscribe to:
Post Comments
(
Atom
)
No comments :
Post a Comment